Kiln dried hardwood lumber is used for the foundation of each frame. All frames are cut precisely and assembled by hand using select 5/4''hardwoods, which are then joined by glue and double-dowels to strengthen and reinforce the frame. The 4 corners of the frame are reinforced with corner blocks which are glued, screwed, and stapled to the frame, a process that triples the strength and stability of the frame. All frames are sanded along the edges to create softer lines and eliminate hard edges that over time can be abrasive to upholstery material.
Steel bands are stretched under strips of webbing and are double nailed to the frame. This is the foundation for the spring chamber which adds incredible strength and eliminates the possibility of any future sagging.Eight-way hand-tied double cone coil springs are securely nailed to the hardwood frame and offer the ultimate in firm support and long lasting comfort. Eight-way hand tying is an age-old construction technique...passed down through generations of craftsmen and women. It is an art which takes time and patience... but for exquisite comfort... there is NO substitute! We combine the best of traditional hand craftsmanship and modern technology to produce frames that are among the finest in the upholstery business
Each frame is upholstered by an experienced craftsman with great attention to detail. Layers of cotton batting and pre-formed rubber are used throughout the frame for unseen form and luxurious comfort. Many frames are standard with accent nails which are meticulously applied one at a time by the hands of an experienced craftsman.
We use a variety of reclaimed and sustainably sourced woods such as: plantation-sourced birch, elm, fir, sheesham, acacia, and other aged woods.
A clear lacquer finish is used on our furniture. We do not apply a wax finish; however, a wax can be applied
We take pride in everything we build. Here are just a few aspects of the products we build: Chair legs and frames are reinforced by both gluing and screwing a large corner brace into each corner after the frame and leg have been joined together with mortise and tenon construction. Dining legs are connected by a reinforced V-grooved corner block and two bolts that work together to create the most sturdy frame available in order to eliminate any movement. Our case goods are deeper and our drawers are full extension with soft closing guides
Choose from seven kinds of wood and 30 finish options. We use a commercial grade catalyzed varnish to protect all our furniture. We seal all sides of the furniture, such as the underside of the table, bottom of chairs, etc.
You will need to register with us as the original owner of Fusion Design furniture. Should the properly maintained furniture fail at any time during the ownership and lifetime of the original owner because of workmanship, not because of normal use, misuse, neglect or abuse, or exposure to extreme heat, cold, or humidity, we will either repair or replace it upon our discretion. This warranty does not apply to any damage in transit or freight costs to and from factory. Fusion Designs is not responsible for gapping or seasonal cracking on items after 2 years. 1 year warranty on electronics.
Magnussen recognises that we must integrate our business values and operations to meet the expectations of our stakeholders. They include customers, employees, suppliers, the community and the environment.
We recognise that our social, economic and environmental responsibilities to these stakeholders are integral to our business. We aim to demonstrate these responsibilities through our actions and within our corporate policies.
We take seriously all feedback that we receive from our stakeholders and, where possible, maintain open dialogue to ensure that we fulfil the requirements outlined within this policy.
We shall be open and honest in communicating our strategies, targets, performance and governance to our stakeholders in our continual commitment to sustainable development.
The Executives are responsible for the implementation of this policy and will make the necessary resources available to realise our corporate responsibilities. The responsibility for our performance on this policy rests with all employees throughout the company.
The black metal patented parts of the RECLINING MECHANISM carry a Limited Lifetime Warranty. The reclining mechanism is warranted to be free of defects for as long as you, the original consumer, own the furniture.
Cushions, wooden frame components and springs are warranted to be free of defects in materials and workmanship for FIVE (5) YEARS from the date of sale.
All upholstery fabrics and leathers are warranted against defective materials and workmanship for ONE (1) YEAR from the date of purchase. This warranty covers seam failure, fabric separation and nap loss. Excluded from the warranty are cover piling, fading, stretching and dye lots. Natural markings such as scars, brands, grain variations, wrinkles, etc., will be considered normal characteristics and not construed as defects. Nature's trademarks leave no two cow hides the same, so color variations could occur. Where there is evidence of excessive soiling, improper cleaning, abuse or where the fabric or leather has had some form of chemical applied, the fabric/leather warranty will not apply.
Lift Chair components are warranted to be free of defects for THREE (3) YEARS from the date of sale. Gold Standard power motors, as well as all other motors are warranted to be free of defects for THREE (3) YEARS from the date of sale.
Every Stylus frame is made with an extra thick 1 1/8" solid wood frame of selected soft and hardwoods that have been kiln dried. All frames are stapled, glued, and corner blocked for added durability allowing Stylus to offer a lifetime warranty
Stylus uses only high quality polyurethane foam ranging from 2.0 to 2.75 pound density in seats. Since every customer is different Stylus offers a selection of different foam firmness for seat cushions. To ensure cushions keep their shape, Stylus shaves a double crown into our cushion cores and wraps them in Dacron to prevent the fabric from creeping and slipping. Many styles are available with Feathersoft seat cushions.
Many Stylus styles are available as twin, full and queen size sofabeds. Every Stylus sofabed uses a contract grade mechanism that features tubular steel construction. Our Imperial Rest XL innerspring mattress is nearly 7" thick offering superior comfort and support. To provide continuity of tailoring Stylus sofabeds feature a self-covered fabric flap to hide the mechanism when closed.
Most regular line fabrics will be under warranty for the period of one year after date of purchase by the consumer. Certain fabrics, essential for reason of styling, do not meet all the performance requirements of Stylus and therefore, cannot be warranted against wear, seam slippage, shrinkage, and fading. Each dealer shall know beforehand which fabrics are included in this category. Close out, end of line and seconds bear no warranty whatsoever. This warranty does not apply to fabrics treated with aftermarket fabric treatments or fabrics exposed to pets. This should be made perfectly clear to your consumer before purchase to avoid problems later. Please advise your customers that fabrics should be cleaned by professional cleaners only.
All products manufactured by Stylus shall bear a lifetime (25 year) pro-rated* frame and spring warranty. All sofa-bed units and mattresses feature a three year pro-rated warranty. This warranty does not cover defects or damage caused by, or resulting in negligence by the user or mover of the product or accident, improper care, maintenance, repair and failure to follow directions for proper use. The foam products used in Stylus seat and back cushions shall bear a lifetime (25 year) pro-rated* warranty against excessive loss of resiliency. Note that all foam will soften initially and this is considered normal. Each customer should be notified of the proper care for seat cushions. This includes rotating cushions weekly and not removing covers from cushions for cleaning.
(1) Use only cold water when cleaning to avoid shrinkage, (2) If spills occur blot immediately then spot clean with mild soap and cold water, (3) Do not use oxygen cleaners on your rug, (4) Avoid direct sunlight to prevent fading, (5) For best results, periodic professional cleaning is recommended.
Placing the correct size rug in your space is as important as choosing the right color or pattern. A rug that it is too small will shift the balance of the room unfavorably. A rug that is too big, especially in open floor plans, may put the area designations off. There are a few rules of thumb, but a picture says it better. Use these handy guides by Interior Designer Lisa Ferguson to make the best choice.